The publish discuses a consequently improving 25 LED timer circuit which can be activated on the 1st day of December to ensure that each LeD illuminates on each day until the 25th of December (on Christmas) when all the 25 LeD can be viewed lighted.
IC1-----IC2 = 4017
T1, T2 = BC547
pin15 capacitor, resistor are 0.22uF and 1M respectively
rest of the resistors are all 4k7
The Design
The suggested digital Christmas candle light timer circuit are typically executed by configuring the above two circuits with the aid of the following guidelines:
The left diagram above develops the 25 LED timer circuit which can be meant to light up in sequence from day#1 when the circuit is turned on, until the 25he of December when the final 25th LeD lights up, at the rate of 1 LED per day.
The phase is produced by wiring or cascading three IC 4017 ICs. The clock inputs of all the three ICs are rigged with the clock output of the right hand side circuit utilizing IC 4060, whose pin3 output is usually to be associated with the pin14 of all the IC 4017.
R1, R2 and C1 of IC1 are determined such that pin3 generates a high clock after a period of precisely 24 hours, as soon as the method is turned on.
This 24 hour clock pulse is provided to the pin14 of the three 4017 ICs to ensure that a high logic shifts in sequence from pin3 of IC1 on a daily basis until the 25th day when the last LED at pin#1 of IC3 lights up.
The circuit is controlled applying two 9V rechargeable batteries, one being linked instantly with the supply pins of the IC phases although the other linked by means of a 1K resistor.
The battery which happens to be hooked up by means of a 1K resistor is completely associated with the circuit and ensures that the ICs are invariably operated with the minimum needed current, to be able to maintain the memory of the ICs in the event the main battery becomes exhausted during the course of the 25 day period and while the user eliminates it for recharging and replacing it back.
IC1-----IC2 = 4017
T1, T2 = BC547
pin15 capacitor, resistor are 0.22uF and 1M respectively
rest of the resistors are all 4k7
The Design
The suggested digital Christmas candle light timer circuit are typically executed by configuring the above two circuits with the aid of the following guidelines:
The left diagram above develops the 25 LED timer circuit which can be meant to light up in sequence from day#1 when the circuit is turned on, until the 25he of December when the final 25th LeD lights up, at the rate of 1 LED per day.
The phase is produced by wiring or cascading three IC 4017 ICs. The clock inputs of all the three ICs are rigged with the clock output of the right hand side circuit utilizing IC 4060, whose pin3 output is usually to be associated with the pin14 of all the IC 4017.
R1, R2 and C1 of IC1 are determined such that pin3 generates a high clock after a period of precisely 24 hours, as soon as the method is turned on.
This 24 hour clock pulse is provided to the pin14 of the three 4017 ICs to ensure that a high logic shifts in sequence from pin3 of IC1 on a daily basis until the 25th day when the last LED at pin#1 of IC3 lights up.
The circuit is controlled applying two 9V rechargeable batteries, one being linked instantly with the supply pins of the IC phases although the other linked by means of a 1K resistor.
The battery which happens to be hooked up by means of a 1K resistor is completely associated with the circuit and ensures that the ICs are invariably operated with the minimum needed current, to be able to maintain the memory of the ICs in the event the main battery becomes exhausted during the course of the 25 day period and while the user eliminates it for recharging and replacing it back.
No comments:
Post a Comment